Metalen kabelgland (metrysk/Pg/Npt/G thread)
Metalen kabelgland (metrysk/Pg/Npt/G thread)
Ynlieding
Kabelklieren wurde benammen brûkt om de kabels te klemmen, te reparearjen, te beskermjen tsjin wetter en stof. Se wurde breed tapast op sokke fjilden as kontrôle boards, apparaten, ljochten, meganyske apparatuer, trein, motors, projekten ensfh.Wy kinne foarsjen jo mei metalen kabel glands makke fan nikkel-plated messing (Bestelling No.: HSM), RVS (Oarder No.: HSMS) en aluminium (Oarder No.: HSMAL).
| Materiaal: | Body: nikkel-plated messing; seal: polyamide; sealing: oanpast rubber |
| Temperatuerberik: | Min -40℃,Maksimum 100℃,Koarte termyn 120℃ |
| Beskermingsgraad: | IP68 (IEC60529) mei passende O-ring binnen spesifisearre klemberik |
| Eigenskippen: | Ferset tsjin trilling en ynfloed, yn oerienstimming mei IEC-60077-1999. |
| Applikaasjes: | Masinegebou, elektryske apparatuer, elektryske kontrôlekast |
| Sertifikaasjes: | CE, RoHS, UL |
Spesifikaasje
(Nim asjebleaft kontakt mei ús op foar mear ynformaasje as jo oare maten nedich binne net opnommen yn 'e folgjende list.)
| Nikkel-plated messing kabel gland (metryske thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-M8 | M8x1.0 | 3~5 | 8 | 6 | 19 | 14/14 | 50 |
| HSM-M10 | M10x1.0 | 3~6.5 | 10 | 6 | 19 | 14/14 | 50 |
| HSM-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-M16-H | M16×1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16-D | M16×1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| HSM-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-M20-H | M20×1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-M20 | M20×1.5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20-D | M20×1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-M22 | M22×1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-M24-H | M24×1.5 | 6~12 | 24 | 7 | 23.5 | 24/27 | 32 |
| HSM-M24 | M24×1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-M25-H | M25×1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-M25 | M25×1.5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-M25-D | M25×1.5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M27-H | M27×2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-M27 | M27×2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-M30-H | M30×2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM-M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-M32-H | M32×1.5 | 13~18 | 32 | 8 | 26 | 30/36 | 18 |
| HSM-M32 | M32×1.5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-M32-D | M32×1.5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM-M33 | M33×2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-M36-H | M36×2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM-M36 | M36×2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-M40-H | M40×1.5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-M40 | M40×1.5 | 22~30 | 40 | 9 | 35,5 | 45/45 | 8 |
| HSM-M40-D | M40×1.5 | 22~32 | 40 | 9 | 38,5 | 50/50 | 4 |
| HSM-M42 | M42×2.0 | 22~32 | 42 | 9 | 38,5 | 50/50 | 4 |
| HSM-M48 | M48×2.0 | 22~32 | 48 | 9 | 38,5 | 50/52 | 4 |
| HSM-M50 | M50×1.5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-M56 | M56×2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 4 |
| HSM-M60 | M60×2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-M63 | M63×1.5 | 37~44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-M63-D | M63×1.5 | 42~53 | 63 | 10 | 44,5 | 75/75 | 2 |
| HSM-M64 | M64×2.0 | 37~44 | 64 | 10 | 41 | 65/70 | 2 |
|
|
|
| |||||
| Nikkel-plated messing kabel gland (metryske thread - Jumbo grutte) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | SW1/SW2 | H wearde | Pakket |
|
| Diminsje | mm | mm | mm |
|
| units |
| HSM-M72-H | M72X2.0 | 52-57 | 72 | 12 | 80/80 | 43 | 2 |
| HSM-M75-H | M75X2.0 | 52-57 | 75 | 12 | 80/80 | 43 | 2 |
| HSM-M80-H | M80X2.0 | 52-57 | 80 | 12 | 80/86 | 43 | 2 |
| HSM-M72 | M72X2.0 | 55-61 | 72 | 12 | 86/86 | 43 | 2 |
| HSM-M75 | M75X2.0 | 55-61 | 75 | 12 | 86/86 | 43 | 2 |
| HSM-M80 | M80X2.0 | 55-61 | 80 | 12 | 86/86 | 43 | 2 |
| HSM-M80-D | M80X2.0 | 60-66 | 80 | 12 | 90/90 | 43 | 2 |
| Nikkel-plated messing kabel gland (metryske thread: ferlingde thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-M12-L | M12×1.5 | 3~6.5 | 12 | 10 | 19 | 14/14 | 50 |
| HSM-M16-HL | M16×1.5 | 3~6.5 | 16 | 10 | 20 | 14/18 | 50 |
| HSM-M16-L | M16×1.5 | 4~8 | 16 | 10 | 21 | 17/18 | 50 |
| HSM-M16-DL | M16×1.5 | 5~10 | 16 | 10 | 22.5 | 20/20 | 50 |
| HSM-M18-L | M18×1.5 | 5~10 | 18 | 10 | 22.5 | 20/20 | 50 |
| HSM-M20-HL | M20×1.5 | 5~10 | 20 | 10 | 22.5 | 20/22 | 32 |
| HSM-M20-L | M20×1.5 | 6~12 | 20 | 10 | 23.5 | 22/22 | 32 |
| HSM-M20-DL | M20×1.5 | 8~14 | 20 | 10 | 23 | 24/24 | 32 |
| HSM-M22-L | M22×1.5 | 8~14 | 22 | 10 | 23 | 24/24 | 32 |
| HSM-M24-HL | M24×1.5 | 6~12 | 24 | 12 | 23.5 | 24/27 | 32 |
| HSM-M24-L | M24×1.5 | 8~14 | 24 | 12 | 23 | 24/27 | 18 |
| HSM-M25-HL | M25×1.5 | 8~14 | 25 | 12 | 23 | 24/28 | 18 |
| HSM-M25-L | M25×1.5 | 10~16 | 25 | 12 | 24.5 | 28/28 | 18 |
| HSM-M25-DL | M25×1.5 | 13~18 | 25 | 12 | 26 | 30/30 | 18 |
| HSM-M27-HL | M27×2.0 | 10~16 | 27 | 12 | 24.5 | 28/30 | 18 |
| HSM-M27-L | M27×2.0 | 13~18 | 27 | 12 | 26 | 30/30 | 18 |
| HSM-M30-HL | M30×2.0 | 10~16 | 30 | 12 | 24.5 | 28/34 | 18 |
| HSM-M30-L | M30×2.0 | 13~18 | 30 | 12 | 26 | 30/34 | 18 |
| HSM-M32-HL | M32×1.5 | 13~18 | 32 | 12 | 26 | 30/36 | 18 |
| HSM-M32-L | M32×1.5 | 15~22 | 32 | 12 | 28 | 36/36 | 18 |
| HSM-M32-DL | M32×1.5 | 18~25 | 32 | 12 | 33 | 40/38 | 8 |
| HSM-M33-L | M33×2.0 | 18-25 | 33 | 12 | 33 | 40/38 | 8 |
| HSM-M36-HL | M36×2.0 | 15~22 | 36 | 12 | 28 | 36/40 | 8 |
| HSM-M36-L | M36×2.0 | 18~25 | 36 | 12 | 33 | 40/40 | 8 |
| HSM-M40-HL | M40×1.5 | 18~25 | 40 | 15 | 33 | 40/45 | 4 |
| HSM-M40-L | M40×1.5 | 22~30 | 40 | 15 | 35,5 | 45/45 | 4 |
| HSM-M40-DL | M40×1.5 | 22~32 | 40 | 15 | 38,5 | 50/50 | 4 |
| HSM-M42-L | M42×2.0 | 22~32 | 42 | 15 | 38,5 | 50/50 | 4 |
| HSM-M48-L | M48×2.0 | 22~32 | 48 | 15 | 38,5 | 50/52 | 4 |
| HSM-M50-L | M50×1.5 | 30~38 | 50 | 15 | 40 | 58/55 | 2 |
| HSM-M56-L | M56×2.0 | 30~38 | 56 | 15 | 40 | 58/60 | 4 |
| HSM-M60-L | M60×2.0 | 37~44 | 60 | 15 | 41 | 65/65 | 2 |
| HSM-M63-L | M63×1.5 | 37~44 | 63 | 15 | 41 | 65/70 | 2 |
| HSM-M63-DL | M63×1.5 | 42~53 | 63 | 15 | 44,5 | 75/75 | 1 |
| HSM-M64-L | M64×2.0 | 37~44 | 64 | 15 | 41 | 65/70 | 2 |
| Nikkel-plated messing kabel gland (PG thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-P07 | PG7 | 3~6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-P09-H | PG9 | 3~6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| HSM-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11 | PG11 | 5~10 | 18.6 | 7 | 22.5 | 20/20 | 32 |
| HSM-P13.5-H | PG13.5 | 5~10 | 20.4 | 7 | 22.5 | 20/22 | 32 |
| HSM-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-P16-H | PG16 | 6~12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| HSM-P16 | PG16 | 8~14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21-H | PG21 | 10~16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| HSM-P21 | PG21 | 13~18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29-H | PG29 | 15~22 | 37 | 8 | 28 | 36/40 | 8 |
| HSM-P29 | PG29 | 18~25 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36 | PG36 | 22~32 | 47 | 9 | 38,5 | 50/50 | 4 |
| HSM-P42 | PG42 | 30~38 | 54 | 9 | 40 | 58/58 | 2 |
| HSM-P48 | PG48 | 37~44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Nikkel-plated messing kabel gland (PG thread: ferlingde thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-P07-L | PG7 | 3~6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| HSM-P09-HL | PG9 | 3~6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-P09-L | PG9 | 4~8 | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-P11-L | PG11 | 5~10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-P13.5-HL | PG13.5 | 5~10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-P13.5-L | PG13.5 | 6~12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| HSM-P16-HL | PG16 | 6~12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-P16-L | PG16 | 8~14 | 22.5 | 10 | 23 | 24/24 | 32 |
| HSM-P21-HL | PG21 | 10~16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-P21-L | PG21 | 13~18 | 28.3 | 12 | 26 | 30/30 | 18 |
| HSM-P29-HL | PG29 | 15~22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-P29-L | PG29 | 18~25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-P36-L | PG36 | 22~32 | 47 | 15 | 38,5 | 50/50 | 4 |
| HSM-P42-L | PG42 | 30~38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-P48-L | PG48 | 37~44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Nikkel-plated messing kabel gland (G thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-G3/8 | G3/8" | 4~8 | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-G1/2-H | G1/2" | 5~10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-G1/2 | G1/2" | 6~12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-G1/2-D | G1/2" | 8~14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-G3/4-TH | G3/4" | 6~12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-G3/4-H | G3/4" | 8~14 | 26.44 | 8 | 23 | 24/30 | 18 |
| HSM-G3/4 | G3/4" | 13~18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-G1 | G1" | 18~25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-G1 1/4 | G1 1/4" | 22~32 | 41.91 | 10 | 38,5 | 50/50 | 4 |
| HSM-G1 1/2 | G1 1/2" | 30~38 | 47.8 | 10 | 40 | 58/55 | 2 |
| HSM-G2 | G2" | 37~44 | 59.61 | 11 | 41 | 65/65 | 2 |
| Nikkel-plated messing kabel gland (NPT thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artikelnr. | Thread | Clamping berik | AG | GL | H | Wrench grutte | Pakket |
|
| Diminsje | mm | mm | mm | mm | mm | units |
| HSM-N3/8 | NPT3/8" | 4~8 | 17.05 | 11 | 21 | 17/20 | 50 |
| HSM-N1/2-H | NPT 1/2" | 5~10 | 20.85 | 13 | 23.5 | 20/23 | 32 |
| HSM-N1/2 | NPT 1/2" | 6~12 | 20.85 | 13 | 23.5 | 22/23 | 32 |
| HSM-N1/2-D | NPT 1/2" | 8~14 | 20.85 | 13 | 23.5 | 24/24 | 32 |
| HSM-N3/4-TH | NPT3/4" | 6~12 | 26.3 | 13 | 23.5 | 22/30 | 18 |
| HSM-N3/4-H | NPT3/4" | 8~14 | 26.3 | 13 | 23 | 24/30 | 18 |
| HSM-N3/4 | NPT3/4" | 13~18 | 26.3 | 13 | 26 | 30/30 | 18 |
| HSM-N1 | NPT1" | 18~25 | 33.15 | 16 | 33 | 40/40 | 8 |
| HSM-N1 1/4 | NPT1 1/4" | 22~32 | 41.85 | 16 | 38,5 | 50/50 | 4 |
| HSM-N1 1/2 | NPT1 1/2" | 30~38 | 47.75 | 18 | 40 | 58/55 | 2 |
| HSM-N2 | NPT2" | 37~44 | 59.55 | 18 | 41 | 65/65 | 1 |
